Friday, July 20, 2018 Your One-Stop Source for Industrial and Electrical Products
  
Home
Contact
Linecard
1-800-356-0259 
Go to basket
call us contact us
 Product Links
 

Abrasives

 

Adhesives/Sealents

 

Batteries

 

Bits/Blades

 

Cable Ties

 

Clamps/Clips

 

Connectors

 

Drill Bits

 

Electrical

 

Fasteners

 

Hardware

 

Heat Shrink

 

Lighting

 

Lighting (HID/Haz/Signs)

 

Paint

 

Relays

 

Shrink Tubing

 

Solderless Terminals

 

Surge Suppression/UPS

 

Tools

 

Welding

 

Wire/Cable

 

Wire Duct

Parts by Manufacturer
 Inside SRI
About SRI
Contact Us
Order/Shipping Info
International Orders
Privacy Statement


Master Card  VISA
American Express  Discover
UPS

 

Meltric Corporation

meltric logo

meltric plugs and receptacles
Meltric Industrial Plugs and Receptacles - A high tech line of power plugs, receptacles, connectors, including multipins that are U.L. approved, and horsepower rated to connect and disconnect under load from 20 amps to 600 amps up to 600 volts without a mechanical interlock required. The non-fused disconnect switch, using a pressure contact technology with a proven track record for safety and reliability --similar to that of heavy duty switchgear, has a world wide patent. They are offered in watertight configurations, with all units meeting NEC requirements for lockout/tagout. This design takes safety to a new and higher level versus the current pin / sleeve and twist-lock technology. Meltric products are safe, simple, switch rated & cost effective too!
arc flash protection nfpa compliance
Click here for NFPA and NEC Compliance Information
 

Meltric Plugs, Connectors, and Receptacles

DSN Decontactor Series

20 - 60 AMPS
Heavy duty, watertight (NEMA 4X, IP67), and non-metallic range of plugs, receptacles, inlets, and connectors - switch and horsepower rated for resistive and inductive loads

View DSN series part list
View Product Page
Meltric DSN product page

DS Decontactor Series


20 - 200 AMPS
Heavy duty, watertight (NEMA 3R to 4X, IP44, IP67), metallic and non-metallic range of plugs, receptacles, inlets, and connectors - switch and/or horsepower rated for resistive and inductive loads

View DS series part list
View Product Page
Meltric DS product page

DB Decontactor Series


30 - 100 AMPS
Heavy duty metallic range of watertight (IP67) plugs, receptacles, inlets, and connectors - switch and horsepower rated (10 - 60 H.P.) for resistive and inductive loads

View DB series part list
View Product Page
Meltric DB product page

PN Series


15 - 30 AMPS
Small, compact, metallic and non-metallic industrial and commercial use
plugs, receptacles, inlets, and connectors - circuit breaking type for load making and breaking

View PN series part list
View Product Page
Meltric PN product page

DR Series


30 - 250 AMPS
Heavy duty, metallic and non-metallic plugs, receptacles, inlets, and connectors - disconnect service only - not for current interrupting, but has all the other safety features of the DS & DSR ranges

View DR series part list
View Product Page
Meltric DSN product page

Multipin Series


5 - 150 AMPS
6 - 37 pins, metallic and non-metallic, heavy duty, circuit making and breaking, plugs, receptacles, inlets, and connectors - designed for 10,000 minimum plug and unplug cycles either on or off load

View Product Page
Meltric Multipin product page

PFQ / PF Series


300 - 600 AMPS
Very heavy duty, watertight (IP67), metallic plugs, receptacles, inlets, and connectors - mechanically interlocked pilot pins and safety shutters for safe and easy operations

View PF/PFQ series part list
View Product Page
Meltric PF/PFQ product page

DX Series


20 - 100 AMPS
Class I Div 1 & Div 2, Class II Div 1 & Div 2, hazardous location, plugs, receptacles, inlets, and connectors - IEC rated for Zone 1
View DX series part list
View Product Page
Meltric DSN product page

DXN Series


20, 30,& 60 AMPS
NEMA 4X and IP67 watertight seal Class I Div 1 & Div 2, Class II Div 1 & Div 2, hazardous location, plugs, receptacles, inlets, and connectors - IEC rated for Zone 1
View DXN series part list
View Product Page
Meltric DSN product page

WS: Single Pole


200 - 1000 AMPS
Single pole connectors and plugs for welding and other
applications requiring single line feeds

View WS series part list
View Product Page
WS product page

LC: Battery Connectors


50 - 200 AMPS
Inlets and connectors for battery charging and battery interconnect - lever type operation for ease of use and positive connection

View LC series part list
View Product Page
Meltric LC product page


© 2001-2018 Source Research, Inc.