Tuesday, August 21, 2018 Your One-Stop Source for Industrial and Electrical Products
  
Home
Contact
Linecard
1-800-356-0259 
Go to basket
call us contact us
 Product Links
 

Abrasives

 

Adhesives/Sealents

 

Batteries

 

Bits/Blades

 

Cable Ties

 

Clamps/Clips

 

Connectors

 

Drill Bits

 

Electrical

 

Fasteners

 

Hardware

 

Heat Shrink

 

Lighting

 

Lighting (HID/Haz/Signs)

 

Paint

 

Relays

 

Shrink Tubing

 

Solderless Terminals

 

Surge Suppression/UPS

 

Tools

 

Welding

 

Wire/Cable

 

Wire Duct

Parts by Manufacturer
 Inside SRI
About SRI
Contact Us
Order/Shipping Info
International Orders
Privacy Statement


Master Card  VISA
American Express  Discover
UPS

Bits/Blades Page

Router Bits

Subcategories

Select part number for more details or to add to cart.
Results Displayed 41 - 50 of 96
«   3    4    5    6    7   »
Part Manf. Description Picture
D8687 Whiteside Machine Router Bit, Dovetail, Carbide, 3" Overall Length, 1" Cut Depth, 1/2" Shank Size, 11/16" Large Diam, 8° Bit Angle, Whiteside Machine  Part Number D8687
D8812 Whiteside Machine Router Bit, Dovetail, Carbide, 3-1/4" Overall Length, 1-1/4" Cut Depth, 1/2" Shank Size, 13/16" Large Diam, 8° Bit Angle, Whiteside Machine  Part Number D8812
D9372 Whiteside Machine Router Bit, Dovetail, Carbide, 2" Overall Length, 3/8" Cut Depth, 1/4" Shank Size, 3/8" Large Diam, 9° Bit Angle, Whiteside Machine  Part Number D9372
D9375 Whiteside Machine Router Bit, Dovetail, Carbide, 2" Overall Length, 3/8" Cut Depth, 1/2" Shank Size, 3/8" Large Diam, 9° Bit Angle, Whiteside Machine  Part Number D9375
D9376 Whiteside Machine Router Bit, Dovetail, Carbide, 2-1/2" Overall Length, 3/8" Cut Depth, 1/2" Shank Size, 3/8" Large Diam, 9° Bit Angle, Whiteside Machine  Part Number D9376
D9390 Whiteside Machine Router Bit, Dovetail, Carbide, 2" Overall Length, 3/8" Cut Depth, 1/2" Shank Size, .390" Large Diam, 9° Bit Angle, Whiteside Machine  Part Number D9390
WM3092 Whiteside Machine Door Edge Bit - Front Face - 1/4 inch shank, 1-3/8 inch diameter - These bits cut a decorative edge along the front face of the door edge while leaving most of the edge straight. The shallow design works especially well on doors using concealed European style cup hinges. Many of our other edge profile bits also make good door edges, however those with deeper profiles may not be compatible with the European style cup hinges. Whiteside Machine Door Edge Bits Part Number WM3092
WM3292 Whiteside Machine Door Edge Bit - Front Face - 1/2 inch shank, 1-3/8 inch diameter - These bits cut a decorative edge along the front face of the door edge while leaving most of the edge straight. The shallow design works especially well on doors using concealed European style cup hinges. Many of our other edge profile bits also make good door edges, however those with deeper profiles may not be compatible with the European style cup hinges. Whiteside Machine Door Edge Bits Part Number WM3292
WM5610 Whiteside Machine MDF Door Bits are designed to give the illusion of raised panel door construction in MDF and solid panel doors. Use them individually for a nice simple raised panel effect in one pass. Or use one of the "Panel" bits in conjunction with one of the "Stile" bits to create a more authentic raised panel revealing effect. Add a bearing to the shank in order to cut your pattern by following an edge guide. The recommendation is four strips clamped around the perimeter of the door. Try curving the top strip for an arched pattern. Follow the guide and route both inside and outside profiles, there is no need to move the guide for the second cut. Use a larger bearing on the panel bit to take care of the offset. Use bearing number B16 for the stile bits and bearing number B24 for the panel bits. Secure the bearings to the shank with part number LC-12 Lock collar. When making the second cut, match the depth setting of the first cut in order to obtain a pattern with a flat bottom - or alter the depth to add an extra distinctive "step" in the bottom of your reveal. Complete the door by adding a door edge pattern around the outside edge. Whiteside Machine  Part Number WM5610
WM5620 Whiteside Machine MDF Door Bits are designed to give the illusion of raised panel door construction in MDF and solid panel doors. Use them individually for a nice simple raised panel effect in one pass. Or use one of the "Panel" bits in conjunction with one of the "Stile" bits to create a more authentic raised panel revealing effect. Add a bearing to the shank in order to cut your pattern by following an edge guide. The recommendation is four strips clamped around the perimeter of the door. Try curving the top strip for an arched pattern. Follow the guide and route both inside and outside profiles, there is no need to move the guide for the second cut. Use a larger bearing on the panel bit to take care of the offset. Use bearing number B16 for the stile bits and bearing number B24 for the panel bits. Secure the bearings to the shank with part number LC-12 Lock collar. When making the second cut, match the depth setting of the first cut in order to obtain a pattern with a flat bottom - or alter the depth to add an extra distinctive "step" in the bottom of your reveal. Complete the door by adding a door edge pattern around the outside edge. Whiteside Machine  Part Number WM5620
Results Displayed 41 - 50 of 96
«   3    4    5    6    7   »

Can't find Bits/Blades you want? Describe it here...

First Name: Enter your first name.Exceeded maximum number of characters.
Last Name: Enter your last name.Exceeded maximum number of characters.
Email: Enter your email address.Invalid format.
Phone: Enter your phone number.Invalid format.
Describe what you want.
-For Fasteners, include Drive Type, Head Type, Length, Material, and other special requirements:
-For Drill Bits, include Bit Type, Length, Material, and other special requirements:

Don't forget a description.
*You will have an answer soon.

If you can't find what you need, enter in the box a specific keyword, manufacturer or tool name.
or Call us at 1-800-356-0259

Find By Description
Please use singular words
Example: (Use "Brush" not "Brushes")

Find By Manufacturer


© 2001-2018 Source Research, Inc.