Saturday, December 15, 2018 Your One-Stop Source for Industrial and Electrical Products
  
Home
Contact
Linecard
1-800-356-0259 
Go to basket
call us contact us
 Product Links
 

Abrasives

 

Adhesives/Sealents

 

Batteries

 

Bits/Blades

 

Cable Ties

 

Clamps/Clips

 

Connectors

 

Drill Bits

 

Electrical

 

Fasteners

 

Hardware

 

Heat Shrink

 

Lighting

 

Lighting (HID/Haz/Signs)

 

Paint

 

Relays

 

Shrink Tubing

 

Solderless Terminals

 

Surge Suppression/UPS

 

Tools

 

Welding

 

Wire/Cable

 

Wire Duct

Parts by Manufacturer
 Inside SRI
About SRI
Contact Us
Order/Shipping Info
International Orders
Privacy Statement


Master Card  VISA
American Express  Discover
UPS

Bits/Blades Page

Drill Bits

Subcategories
  • 12 Inch Aircraft Extension

    Ideal for drilling in mild steels where extra length for reach is required. They have a black oxide surface treatment that is abrasion resistant, reduces chip welding and improves chip flow. Manufactured to National Aerospace Standard 907.


    drill-bits/images/dwdac12.jpg
  • 6 Inch Aircraft Extension Drill Bits

    Ideal for drilling in mild steels where extra length for reach is required. They have a black oxide surface treatment that is abrasion resistant, reduces chip welding and improves chip flow. Manufactured to National Aerospace Standard 907.


    drill-bits/images/dwdac6.jpg
  • Arbor

    A tool component that grips or clamps materials to be machined


    drill-bits/images/DEWA-sm.jpg
  • Burrs

    Burrs are small cutters used in die grinders, rotary tools or dentist's drills.


    drill-bits/images/dulsj-sm.jpg
  • Centers

  • Concrete Screw Anchor Bits

    Designed for drilling in brick, concrete, and sandstone. They are larger than the nominal drill sizes to provide clearance for installation of anchor screws.


    drill-bits/images/52AnchorBitB.jpg
  • Core Drill Bits

    Used to size or enlarge a hole previously drilled, cored, punched, or other pre-formed holes. Not designed to drill from solid.


    drill-bits/images/dwdcoress.jpg
  • Counterbores

    Counterboring is the enlargement of a portion of a hole that has previously been formed. If the counterbored portion is shallow (1/8" or less), the operations is usually known as spot-facing (for bolt head or nut). Otherwise, it is called counterboring.

  • Countersinks

    A countersink is a tapered hole drilled with a wide outer portion. By comparison, a counterbore makes a flat-bottomed hole that might be used with a hex-headed capscrew. A countersink may also be used to remove the burr left from a drilling.

  • Cutters

  • Drill / Countersink Combined

    Combined drills and countersinks are used for producing center holes in workpieces which require precision drilling or machining between centers.


    drill-bits/images/DEW1X3.jpg
  • Drill Bit Sets


    image/craftsman/Kit-Drillbits-Craftsman-sm.jpg
  • Hole Saws / Arbors

    A hole saw (also styled holesaw), also known as a hole cutter, is a circular saw designed to cut through relatively thin workpieces.


    drill-bits/images/hole-saw.jpg
  • Jobber Length Drill Bits

    Jobber-length drills are most common type of drill. The length of the flutes is ten times the diameter of the drill.


    drill-bits/images/wdwfs.jpg
  • Lathe Center

  • Lathe Mandrel

    A lathe uses a mandrel to hold pieces of wood, metal or plastic to be machined as they are turned. In this way, rods can be threaded, furniture legs are turned to have æsthetic patterns, and irregularly-shaped objects can be given a round shape


    drill-bits/images/DEWLM-sm.jpg
  • Masonry Drill Bits

    Designed for drilling in brick, concrete, and sandstone.


    drill-bits/images/dam.jpg
  • Reamers

    A reamer or ream is a tool for enlarging holes and is used in metalworking. It may be used as a hand tool or may have a specialized drive end.


    drill-bits/images/DEWCHAT.jpg
  • Reduced 3-Flatted Shank Drill Bits

    Ideal for drilling in tough, high tensile strength materials. They are precision ground for a high degree of concentricity between shank and body diameter. Shank has triangular-shaped design.


    drill-bits/images/da3f.jpg
  • Reduced Shank Drill Bits

    Ideal for drilling in tough, high tensile strength materials. They are precision ground for a high degree of concentricity between shank and body diameter.


    drill-bits/images/darsd38.jpg
  • Router Bits

  • Saw, Sidechip

  • Screw Extractor

  • Screw Machine Length Drill Bits

    The shorter flute and overall length increase the rigidity, resulting in less deflection, better hole accuracy, and longer tool life. Sizes smaller than 1/16 and larger than 1/2 have the 118º standard point.


    drill-bits/images/dast.jpg
  • Sheeters


    drill-bits/images/dade.jpg
  • Standard Length Drill Bits

    These are made for solid carbide and are designed for drilling abrasive materials or in high temperature applications. Used on cast iron, high silicon aluminum, copper, plastics, bronze, hard rubber, plexiglass, and other similar materials.


    drill-bits/images/dmod.jpg
  • Straight Shank Drill Bits

    Designed for general purpose drilling of iron and steel families in cases where extra long length is required.


    drill-bits/images/dwddl.jpg
  • Taper Length Drill Bits

    Designed for general purpose drilling of iron and steel families in cases where a length longer than Jobber Length is required.


    drill-bits/images/dwdtl.jpg
  • Taper Shank Drill Bits

    Made to fit Morse tapered holders. Designed to perform in a broad range of materials in the iron and steel families.


    drill-bits/images/dwdts.jpg

Select part number for more details or to add to cart.
Results Displayed 31 - 40 of 8928
«   2    3    4    5    6   »
Part Manf. Description Picture
D/A29JX3/8-CO-SET Drill America 1/16'-1/2"x64ths 3/8"SHK COBALT DRILL SET No Photo
Available
D/A29JX3/8-SET Drill America 1/16-1/2x64ths 3/8SHK HS DRILL SET No Photo
Available
D/A29S-CO-SET Drill America 1/16-1/2x64ths COBALT STUB DRILL SET No Photo
Available
D/A29S-SET Drill America 1/16-1/2x64ths HS STUB DRILL SET No Photo
Available
D/A3F1 Drill America Reduced Flatted Shank, Size: 1, Dec. Equivalent 1.0000, Flute Length 3,Surface Treated Flutes, HSS, O.A.L. 6, Drill America Drill America Reduced 3-Flatted Shank Drill Bits Part Number D/A3F1
D/A3F11/16 Drill America Reduced Flatted Shank, Size: 11/16, Dec. Equivalent .6875, Flute Length 3,Surface Treated Flutes, HSS, O.A.L. 6, Drill America Drill America Reduced 3-Flatted Shank Drill Bits Part Number D/A3F11/16
D/A3F1-1/16 Drill America Reduced Flatted Shank, Size: 1-1/16, Dec. Equivalent 1.0625, Flute Length 3,Surface Treated Flutes, HSS, O.A.L. 6, Drill America Drill America Reduced 3-Flatted Shank Drill Bits Part Number D/A3F1-1/16
D/A3F1-1/2 Drill America Reduced Flatted Shank, Size: 1-1/2, Dec. Equivalent 1.5000, Flute Length 3,Surface Treated Flutes, HSS, O.A.L. 6, Drill America Drill America Reduced 3-Flatted Shank Drill Bits Part Number D/A3F1-1/2
D/A3F1-1/32 Drill America Reduced Flatted Shank, Size: 1-1/32, Dec. Equivalent 1.0313, Flute Length 3,Surface Treated Flutes, HSS, O.A.L. 6, Drill America Drill America Reduced 3-Flatted Shank Drill Bits Part Number D/A3F1-1/32
D/A3F1-1/4 Drill America Reduced Flatted Shank, Size: 1-1/4, Dec. Equivalent 1.2500, Flute Length 3,Surface Treated Flutes, HSS, O.A.L. 6, Drill America Drill America Reduced 3-Flatted Shank Drill Bits Part Number D/A3F1-1/4
Results Displayed 31 - 40 of 8928
«   2    3    4    5    6   »

Can't find Bits/Blades you want? Describe it here...

First Name: Enter your first name.Exceeded maximum number of characters.
Last Name: Enter your last name.Exceeded maximum number of characters.
Email: Enter your email address.Invalid format.
Phone: Enter your phone number.Invalid format.
Describe what you want.
-For Fasteners, include Drive Type, Head Type, Length, Material, and other special requirements:
-For Drill Bits, include Bit Type, Length, Material, and other special requirements:

Don't forget a description.
*You will have an answer soon.

If you can't find what you need, enter in the box a specific keyword, manufacturer or tool name.
or Call us at 1-800-356-0259

Find By Description
Please use singular words
Example: (Use "Brush" not "Brushes")

Find By Manufacturer


© 2001-2018 Source Research, Inc.